I haven’t even looked at the code yet but I know I am going to love this

So I wanted to try the ex_ari_example out last night, but I had some trouble with the Asterisk part. I haven’t played with Asterisk before so I’m not really sure what’s going wrong.

1. The docker run ... command uses --net host, which doesn’t work on Mac unfortunately. So I ran it like this instead: docker run -p 8088:8088 -p 8089:8089 -p 5062:5062/tcp -p 5062:5062/udp -p 10000-10099:10000-10099/udp --name asterisk -v $PWD/asterisk_local_config/pjsip.conf:/etc/asterisk/pjsip.conf ex-ari-asterisk (I googled around a bit and guessed at the ports). After this, I could start the project with iex -S mix and it connected!
2. However, I was unable to connect to Asterisk with Zoiper. On the accounts page it says Request Timeout (code: 408) and there is nothing in the Asterisk logs.
3. I then tried running the Asterisk container inside an Ubuntu virtual machine, using --net host, and running it on a bridged network (VM had IP 192.168.33.10). I changed all the references to 127.0.0.1 to 192.168.33.10 in dev.env, so the Elixir project works fine. But Zoiper gives me a new error now. Instead of Request Timeout (code: 408) error, I now get Unauthorized (code: 401) and I see this in the Asterisk logs:

[Feb 14 07:29:30] NOTICE[37]: res_pjsip/pjsip_distributor.c:676 log_failed_request: Request 'REGISTER' from '<sip:ex_ari@192.168.33.10>' failed for '192.168.33.1:5063' (callid: _R51m7KNwSEepDSdZ6NrSA..) - No matching endpoint found
[Feb 14 07:29:30] NOTICE[37]: res_pjsip/pjsip_distributor.c:676 log_failed_request: Request 'REGISTER' from '<sip:ex_ari@192.168.33.10>' failed for '192.168.33.1:5063' (callid: _R51m7KNwSEepDSdZ6NrSA..) - Failed to authenticate
<--- Transmitting SIP response (505 bytes) to UDP:192.168.33.1:5063 --->
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 192.168.33.1:5063;rport=5063;received=192.168.33.1;branch=z9hG4bK-524287-1---339444ffe79eb675
Call-ID: _R51m7KNwSEepDSdZ6NrSA..
From: <sip:ex_ari@192.168.33.10>;tag=5292835a
To: <sip:ex_ari@192.168.33.10>;tag=z9hG4bK-524287-1---339444ffe79eb675
CSeq: 2 REGISTER
WWW-Authenticate: Digest realm="ex_ari",nonce="1581665370/39d4d6299126e965bb54cf6033f8eca3",opaque="389d044662fe0ad8",algorithm=md5,qop="auth"
Server: Asterisk PBX 16.3.0
Content-Length:  0

I wonder if I am using the wrong username/password?

Super curious about this stuff. I don’t have the time anytime soon to dive into Asterisk but damn if I don’t want to

Considering the Erlang/OTP telecommunications heritage, are there previous solutions to work with Asterisk around, do you know?

Cool that you are doing and releasing this!

I run Linux so haven’t had the Mac issues. It looks like you got really really close! I should probably be explicit about the demo only working on Linux as of now.

I’ll dig in a bit more in a few hours. Asterisk is NOT simple to setup. If we get it working would be great if you could write-up some notes for Mac dev.

It looks like your port is incorrect in your Zoiper settings.

Under Settings -> Advanced -> Network

All the way at the bottom.

Make sure your SIP Options port is set to 5062 and the Open random port above 32000 is unchecked

You may need to update the AOR_IPS in dev.env to be 192.168.33.1:5062 as well.

But give it a try with just the port update in Zoiper first.